​Plastic and Wood O Scale Trackside Structures
Wood Bridges and Decking for Model Trains
Custom Model Building Services 
​Kits and Details

Model Structures for Model Railroads

                                            usually sold to feed lots for cattle. DDG is loaded on to trucks for those lots close by and onto hoppers for long range transportation by rail. Approximate foot print for the building 11 inches (W) x 12 inches (L) x 6.50 inches (H) on the high side. Standard color for the building is a light gray with dark gray doors and window however other options are light gray, white and black.

Yard Office

This Yard Office can be used or both Rail Road yards and Industrial complexes. It measures 8 1/4 x 4 1/4 x 4(H) and comes with a single door, double door and 5 windows.

Portable Offices for Your Jobsite

If you need some quick office space on the construction site or don't have the real estate for a big office complex in the industrial yard Model Structures will be happy to trailer over our portable offices.

The standard design has two office containers stacked on top of each other. The footprint is approximately 8 1/2 inches by 3 inches by 6 inches (h). Add an extra one inch for the stairway to the width.

The offices can also be purchased separately for side by side location or a combination of two stacked and one office in a side location. Please note the stacked versions are glued together.

Electrical Sheds

A customer decided to place his terminal strips on top of his layout rather than underneath to allow easier access to wiring. We designed a small 'electrical shed' to place over the terminal strips to hide them from view. These 'electrical sheds' are now being offered for general sale and with a new optional modification. With a proper cutout on one side these sheds (as shown below) can be also used to hide ITADS if so desired. The smaller shed with a footprint of 2 ½ x 2 ½ x 2 ½ h inches can be used with ITADS from Z-Stuff. The larger shed (4 1/8 x 3 x 3 ½ h inches) is good for Lionel and MTH ITADS. The standard color for the electrical sheds will be light gray. Each shed comes standard with two decals (Private Property / Danger Electrical Equipment).

Hopper / Box Car Loading Shed - Redesign

The loading shed has gone through a major redesign. The truck door has been relocated to the side of the building. this allows a dock to be installed both inside and outside of the door. the door is operational. It can be opened and closed. This now allows the train doors to be opened and closed also. The train doors can be built to accommodate track height. This O Scale service shed is designed to be placed over a track to let a hopper cars or box cars load / unload product. The opening for the rail car is a pass through so the building can be placed anywhere on a siding. The front includes an office door. This building will look good as a standalone structure or as an ancillary building in an ethanol or grain complex. WRT an ethanol complex this structure can serve as a Dried Distiller Grains (DDG/DDGS) storage and loading shed. DDG is the solid material left over from the fermentation process to produce alcohol from corn. It is

'Steel' Maintenance / Storage Shed

This O scale service shed is intended to be used as a 'steel' storage / maintenance building track side or in an industrial park. The footprint for the shed is approximately 6 ½ in x 9 ½ in x 5 ¼ in (h). It comes with an office door, two windows and a garage door (approximately 2 ½ in x 3 ¾ in). The shed comes standard with a set of doors that slide open to each side. As always decals are also an additional option. Custom lengths up to 11 inches are available upon request. The standard color is light gray with dark gray widows and office door. Please visit the OnLine Store (Plastic Trackside Structures) for more information.

A-Frame Pump House

A new design has been added to our standard Slant roof Pump House. For the new design the roof has been changed to an A-Frame and the footprint to 3 3/4 x 2 1/4 x 3 (H) inch. The same  options exist for inlet / outlet piping and door light. Below are two versions built for customers.

Pump House

The pump house was originally designed to be used with a large tank farm but is now beign offered as a standalone structure. One side of the pump house has up to four inlet valves while the opposite side has one large outlet valve. The inlet valves are approximately 1 inch off the ground while the outlet valve is about 1 ¼ inch up. The height of the inlet valves will match up with the outlet valves of the large storage tanks which are offered separately. The standard color for the pump house will be light gray. Though not shown each shed comes with two decals (Private Property / Danger Electrical Equipment). The footprint is approximately 3 1/2 x 3 1/2 inches. The roof line slopes from 3 1/2 on one side to 3 inches on the other. More photos are available in the Online Store. Shown below is the 4-inlet valve version connected to a tank farm.

The plastic trackside series is divided into 11 categories. Please select any one of the links below to view our product.

 - Tank Stands
 - Water / Fuel / Sand Towers
 - Fuel Transfer Depots
 - Locomotive Sheds
 - RR / Industrial and City Signs
 - City Structures
 - Cement / Asphalt and Maintenance Platforms
 - Grain Elevators
 - Service and Maintenance Sheds (see below)​
 - Oil Refinery Structures
 - Industrial Yards

Scale House

If bulk commodities are a part of your railroad's freight tonnage then you are in the market for a scale house. Any time a railroad needs to weigh a car it goes to a scale house. Functionally it is a protective shed built around a large weighing machine. The scale house usually contains a large bay window so the person inside can see both ends of the car being weighed in order to write down the car identification number and view oncoming traffic. Usually a scale house is built from corrugated sheet metal however this design simulates brick for a more lasting impression.

Freight House

A customer needed a custom designed freight house to fit an pre-determined area on his layout. the pictures below show what we came up with. If you are interested in this structure please contact me with a quote.

Service and Maintenance Sheds