Model Structures for Model Railroads

Wood Bridges and Decking for Model Trains
Plastic and Wood O Scale Trackside Structures
Custom Model Building Services
Kits and Details

Wood Bridges and Decking for Model Trains
O Scale Trackside Structures
Locomotives/Rolling Stock

HO Scale Truss - Girder Bridge - Trestle Deck

Welcome to the HO Scale site!

HO Scale Bridges and Trestle Decking for Model Railroading

All product sold is assembled and finished with a coat of oil. If you would like an unfinished piece please contact us. And remember custom lengths are available for all product.

To order any product please click the "ON LINE STORE" button on the Navigation bar at the top of this page.

  HO Scale Warren Truss Bridge

The top chords have been shortened and extra diagonal posts have been added to the ends to give the bridge a more realistic look.

4 1/4" wide, 4" high, 14" long
4 1/4" wide, 4" high, 19" long
Custom lengths - please call for quote
Bridge height can be increased to 5" for S scale if desired

HO Scale Deck Bridge

All Deck Bridges are designed to be used with the existing trestle deck stock. The deck bridge shown below measures approximately 13 1/2 inches long and 2 inches high (not including the trestle deck). The trestle deck (18 inches) overhangs the bridge to allow attachment points to your layout. Trestle decks are included in the cost of deck bridges however the deck bridge can be purchased separately. Simply contact us for a price. As with all our other wood product custom lengths are available.

HO Scale Trestle Deck

Shown are both the 18 inch and 24 inch trestle decks with optional bents. Please note track is not included in the sale.

2 1/2" wide, 7/16" high, 18" long
2 1/2" wide, 7/16" high, 24" long
Custom lengths - please call for quote

HO Scale Girder Bridge

The HO scale girder bridge is wide enough to fit track with built in ballast. It comes standard in two lenghts but like any wood product custom lenghts and widths are available on request.

4 1/4" wide, 2" high, 10 1/2" long
4 1/4" wide, 2" high, 13 1/2" long
Custom lengths - please call for quote

HO Scale Girder Bridge with Railing

This is a new girder bridge design that incorporates metal railing. The railing is slightly lower than the standard sitting at about 1" above the bottom chord. For pricing information please naviagate to the On Line Store. Please note the pictures below are of the O Scale version.

HO Scale Trestle Bents

All trestle bents are 9/16" thick and 2 1/2" wide. They are available in four heights, 3" (not shown) 4", 5", and 6". The bents are sold separately. Custom heights such as the 9 1/4 inch tall bent shown below are available upon request.

HO Scale Trestle Deck Bulkheads

These bulkheads are designed to be used at the ends of the trestle decks or any of the bridges offered. The bulkheads start with a cross plank of 2 1/2" at the top sill and steps out to approx. 5 3/4" at the bottom sill. The total height of the eight cross planks is about 2 1/2". There are five posts 4" in height. The bulkheads are also detailed in the back with sway bars.

Please note the bulkheads are sold as a set of two.

HO Scale Double Bent Trestle Bent

The double stack bent has been redesigned! There are times when a double stack trestle bent is required for spans that can not accommodate normally spaced bents. The double stack can be built on either O scale or HO scale and in any height required. Shown below is a HO scale version. Please let us know if you are interested in purchasing any.

qsc/products/wst.qsc.6a92904d-4c75-4625-b03d-0d4fc84240f0.xml